|
|
|
|
 |
|
|
|
Arai Signet Q Interior Liners
All new Arai Signet Q Helmets have
removable interior liners to allow for easier cleaning and a custom fit,
these are available in 5mm, 7mm, 10mm and 12mm. The type II liners
are for X-small and small helmets, type III are for medium and large
helmets and type IV are for X-large and XX-large helmets.
Please find below our selection of Arai Signet Q Interior Liners, if you are unable to find the Arai Interior Liners you are looking for please call 483.483.7223 or email sales@gphelmets.com and we will be happy to help you.
|
|
Arai Signet Q Cheek Pads Installation Tips:
Note: When removing the cheek pads we recommend doing only one side at a time so you can use the other side as a reference for re-installation. Do Not use the emergency release tabs to remove cheek pads from helmet.
To remove the cheek pads, first undo the chinstrap, then pull pad towards the rear of the helmet, then inwards to release the tab and slide it off the strap.
To reinstall the cheek pads (left and right labels indicate the side of the helmet the pad in on when helmet is worn), slip the pad onto the strap, then place the rear tab towards the rear of the helmet and push it under the main padding, push the pad fully into place until the front tab snaps in place.
|
|
|
For BELL Racing Helmets Please visit SpeedwayHelmets.com